Development Test Engineer, Structures (Starship)

DEVELOPMENT TEST ENGINEER, STRUCTURES (STARSHIP)

RESPONSIBILITIES:

This position is a test engineer for the Starship Structural Test team. This team develops, designs, builds, and executes large system-level static and dynamic structural tests. The test engineer's role is highly multidisciplinary; the individual may be expected to:

• Work with vehicle engineers, develop and execute static and dynamic system-level structural tests from conception. This includes test article and test stand configuration, boundary conditions, fluid, electrical, and software schematics, and concept of operations
• Design, modify, and build mechanical systems. Systems include small lugs and brackets through large structural weldments
• Design, modify, build, and troubleshoot fluid systems. Systems include low to high-pressure gaseous working fluids, rocket propellants (including cryogenic propellants), and hydraulic load control systems
• Design, modify, build, and troubleshoot data acquisition (DAQ) and control systems, wiring, and instrumentation. DAQ systems are primarily NI-based, and instruments include strain gages, pressure transducers, deflection gages, load cells, thermocouples, and resistance temperature detectors (RTD)
• Develop and maintain test procedures, sequences, scripts, configuration files, and software
• Operate the test stand from test assembly and activation through test execution with a small team of engineers and technicians
• Provide daily direction and instruction to technicians to integrate test articles and hardware (install instrumentation and wiring, assemble small and large mechanical components, repair metallic structures, pressurize and functional check pressure systems, lift and transport large structures)
• Review data manually or using automatic scripts

BASIC QUALIFICATIONS:

• Bachelor’s degree in mechanical engineering, aerospace engineering, electrical engineering, or other engineering field
• 1+ years of experience with testing, mechanical or data acquisition, and control system design (internships and college competition team count)

PREFERRED SKILLS AND EXPERIENCE:

• Strong technical skills in one or more of the following areas: mechanical or structural design, data acquisition and instrumentation, programming, fluid and hydraulic design or operation, and structural testing
• Demonstrated ability to learn new skills and adapt to new situations - unfazed by challenges that go beyond the traditional comfort zone or experience
• Experience in project ownership under technical and schedule pressure, and where the scope and definition were limited
• Experience testing and operating with or around hazardous systems (high pressure, high energy, hazardous gases and fluids, etc.)
• Experience working on projects that involve the integration of electrical, mechanical, and software systems (launch vehicle and/or spacecraft experience is not required)

ADDITIONAL REQUIREMENTS:

• Flight hardware is typically built in tight quarters, and physical dexterity is required
• Work performed in an environment requiring exposure to fumes, odors, and noise
• Schedule varies depending on site operational needs; flexibility required
• Stand: Up to 6 hours per day
• Sit: Up to 6 hours per day
• Push/Pull: Up to 50lbs. (unassisted) 15 minutes per day
• Overhead reach: Up to 3 hours per day
• Walk: Up to 10 hours per day
• Lift/Carry: Up to 25lbs. (unassisted) 15 minutes per day
• Climb (ladder/stairs): Up to 10 hours per day
• Kneel/Crouch: Up to 3 hours per day
• Upper body twist: Up to 3 hours per day
• Ability to work in temperatures over 80 degrees for 6 hours or more per day
• Candidate must be capable of safely working at heights (up to 500ft), in confined spaces, operating heavy equipment and machinery, and performing the physical requirements of the job listed in the . Candidate may be required to complete a pre-employment questionnaire and/or physical to confirm these capabilities, which may include a medical history review